Hello,
Cumana pcb built from blank pcb and populated ready for testing
Can anyone tell me if bios rom (attached) is correct only 2k in size not 8k
Also anyone have system disk for cumana controller so I can try with hxc floppy emulator
Also anyone have system disk for microdisc controller so I can try with hxc floppy emulator
Thanks
john davis uk
Cumana Disk Controller PCB
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Cumana Disk Controller PCB
- Attachments
-
- Cumana Floppy Controller BIOS.rar
- (1.32 KiB) Downloaded 327 times
- mikeb
- Flight Lieutenant
- Posts: 282
- Joined: Wed Sep 05, 2018 8:03 pm
- Location: West Midlands, UK
- Contact:
Re: Cumana Disk Controller PCB
The Cumana ROM (personally dumped from my own unit) seems to be 8K ...
-r--r--r-- 1 root root 8.0K Oct 6 2010 Data/EPROM Images/OwnedStandard/cumana11.rom
And this dumped from a chip loaned by Steve Marshall ...
-r--r--r-- 1 root root 8.0K Oct 6 2010 Data/EPROM Images/Downloaded/Steve Marshall Loaned Chips/CUMAB01C.rom
So ... have you got a slimmed down light version?
Oddly, I have this (from Source: unknown)
-r--r--r-- 1 root root 2.0K Oct 6 2010 Data/EPROM Images/Downloaded/Oric-01/cumana.rom
Which may be what you've found ... ??
My notes indicate that the chip is a 2764 (8K), however the hexdump shows most of the bottom end of the chip is blank.
Real content runs from 0x1800 to 0x1FFF (so that's where your 2K goes, pushed up at the TOP end of the chip).
TL;DR - 6K of blank, 2K of content = 8K.
-r--r--r-- 1 root root 8.0K Oct 6 2010 Data/EPROM Images/OwnedStandard/cumana11.rom
And this dumped from a chip loaned by Steve Marshall ...
-r--r--r-- 1 root root 8.0K Oct 6 2010 Data/EPROM Images/Downloaded/Steve Marshall Loaned Chips/CUMAB01C.rom
So ... have you got a slimmed down light version?
Oddly, I have this (from Source: unknown)
-r--r--r-- 1 root root 2.0K Oct 6 2010 Data/EPROM Images/Downloaded/Oric-01/cumana.rom
Which may be what you've found ... ??
My notes indicate that the chip is a 2764 (8K), however the hexdump shows most of the bottom end of the chip is blank.
Real content runs from 0x1800 to 0x1FFF (so that's where your 2K goes, pushed up at the TOP end of the chip).
TL;DR - 6K of blank, 2K of content = 8K.
-
- Pilot Officer
- Posts: 80
- Joined: Wed Feb 11, 2015 10:39 am
- Location: uk
Re: Cumana Disk Controller PCB
Hello,
I made a rom 8k with 2k at the top I know that jump vector is at top of rom
thanks
john davis uk
I made a rom 8k with 2k at the top I know that jump vector is at top of rom
thanks
john davis uk
Re: Cumana Disk Controller PCB
Cumana 2 is essentially the same as Microdisc ROM and will run Sedoric etc.
Cumana 1 was not compatible with other systems and needed the Cumana DOS
Microdisc ROM should work in a Cumana controller - as far as I recall !!!
I think the 2K ROM is that supplied with the emulators.
Cumana 1 was not compatible with other systems and needed the Cumana DOS
Microdisc ROM should work in a Cumana controller - as far as I recall !!!
I think the 2K ROM is that supplied with the emulators.