Philips D6260 K7 deck bulk repair

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

I checked the belts, not sure they need replacing even though they are like 30y old.

People sell belts on ebay for like 10€, which is ridiculous… At least I found a more reasonable source I think.

Now, measuring them without cutting them can be challenging. I think the big one is 1x1mm 84mm diameter. The smaller one for the counter is like 0.5x0.5mm 34mm diameter I think.

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

Someone told me there were bad experience with the shop I found for the belts… hopefully this one has better comments everywhere, I'll see.

User avatar
Steve M
Squad Leader
Posts: 731
Joined: Fri Mar 24, 2006 3:33 am
Location: Cumbria, UK
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by Steve M »

There are plenty of people selling packets of assorted belts on ebay for about £3.
They can be square or flat. Make sure you get the right ones.

Usually there is a lot of bands that won't be much use but you can find something useful with different machines.
https://www.ebay.co.uk/itm/263934427392

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

Yes I noticed those, not sure about the quality though. Anyone tried them already?

User avatar
Dbug
Site Admin
Posts: 3750
Joined: Fri Jan 06, 2006 10:00 pm
Location: Oslo, Norway
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by Dbug »

They are not all of equivalent quality, but I did get a couple of packs, square section and circular section ones, because they are cheap and it's practical to get some generic replacements, on the other hand, for high end equipment like my Yamaha TC800 and the Marantz CP430 I got some proper belts because I did not want to second guess the size and tension of belts.

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

Ok, so I received the replacement gears, they look really nice, just a few small bubbles telling they were molded in some way, but nothing preventing them to work.
Philips_D6260_DSCN0957.jpg
I cleaned the second one I have (battery leakage…), replaced the gears and I'll also need to replace the middle battery contact as it's probably too corroded (still taking a vinegar bath)…
Philips_D6260_DSCN0977.jpg

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

Just saw one in GB on eBay if anyone is interested.

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

There's one on eBay in Germany

I don't think DBuG has tested his already?

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »


User avatar
Dbug
Site Admin
Posts: 3750
Joined: Fri Jan 06, 2006 10:00 pm
Location: Oslo, Norway
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by Dbug »

mmu_man wrote:
Fri Apr 09, 2021 7:45 pm
There's one on eBay in Germany

I don't think DBuG has tested his already?
I have, but it's not turning at the right speed, so I will have to open it.

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

Dbug wrote:
Wed May 26, 2021 7:10 am
I have, but it's not turning at the right speed, so I will have to open it.
I doubt the motor has issues… make sure you change the gear first. Possibly a loose belt…

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »

A broken one in Italy.

mmu_man
Flight Lieutenant
Posts: 278
Joined: Thu Sep 21, 2006 7:45 pm
Location: 26000 Valence, FRANCE
Contact:

Re: Philips D6260 K7 deck bulk repair

Post by mmu_man »


Post Reply