I've just received a copy of this manual (in English) . It's only 75 pages and ring-bound. The "Appendixes" start at page 37!
If anyone's interested I'll scan it to PDF and upload it somewhere.
This is the original manual from TANSOFT and relates to the tape-based version of Forth they released in 1983.
It looks really interesting and seems a mixture of low-level assembler type instructions (it has it's own macro-assembler built in - but also a load of "WORDS" equivalent to their BASIC equivalents (e.g PING, ZAP, CIRCLE etc).
As always, there's never enough time to get into these things.
FORTH PROGRAMMING MANUAL - TANSOFT
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
-
- Pilot Officer
- Posts: 74
- Joined: Thu Dec 28, 2006 11:07 pm
- Location: SOUTH WALES UK
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
OK,
It will be sometime next week before I get access to my scanner.
I think the interesting thing is that the possibility arises of a program that could write it's own code ( a learning program that could solve difficult problems - could take months working randomly - but then, once solved, the routine could be SAVED as part of the language).
Regards
Barnsey
It will be sometime next week before I get access to my scanner.
I think the interesting thing is that the possibility arises of a program that could write it's own code ( a learning program that could solve difficult problems - could take months working randomly - but then, once solved, the routine could be SAVED as part of the language).
Regards
Barnsey
Re: FORTH PROGRAMMING MANUAL - TANSOFT
Hi I've just been fixing an atmos obtained working from ebay and loaded oric-forth from a tap file. I you scanned the tansoft manual I'd really welcome a copy.
Cheers Malcolm
Cheers Malcolm
Re: FORTH PROGRAMMING MANUAL - TANSOFT
I've begun scanning it. No idea when I finish, it sometimes takes me months to finish a scan
There are at least 2 versions of this manual, the content is the same but one seems much more "home-made" than the other.
I also noticed there are sometimes duplicated pages in the ring-bound version (at least the content pages, pages 49-50 and 73-74). Is it the same for you Barnsey?
There are at least 2 versions of this manual, the content is the same but one seems much more "home-made" than the other.
I also noticed there are sometimes duplicated pages in the ring-bound version (at least the content pages, pages 49-50 and 73-74). Is it the same for you Barnsey?
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
Re: FORTH PROGRAMMING MANUAL - TANSOFT
Symoon, my scanned copy looks OK (no dupes as far as I can see). If you pm me with your email address I'll send you a copy.
Re: FORTH PROGRAMMING MANUAL - TANSOFT
I have several copies of both the manual and the tape. They are from unsold stock that Tansoft had. (Steve Hopps of Opelco bought up the remaining Tansoft tapes. Twilighte rescued them from Steve Hopps.)