My new Cumana drive ;)
Re: My new Cumana drive ;)
Zaxon is cheating, he uses a time machine to find his beautiful design.
Re: My new Cumana drive ;)
Nooo, i use my time machine for special offers "buy today we can deliver yesterday until 9.00 AM " Some of my customers push me for service like this.....
Anyway, weekend, so i finish assembly first 5, test it, pack , and assembly next 5 boards. Panels is ready,(is 5 hours printing for front and back) rest of components arrived today so i finish sending it until 1 february i hope.
Anyway, weekend, so i finish assembly first 5, test it, pack , and assembly next 5 boards. Panels is ready,(is 5 hours printing for front and back) rest of components arrived today so i finish sending it until 1 february i hope.
Re: My new Cumana drive ;)
Gang of Cumana, ready to go
- Attachments
-
- 20200126_155412.jpg (2.14 MiB) Viewed 8620 times
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
Re: My new Cumana drive ;)
Just a question:
I have a 7.5V PSU for my Oric and it works pretty well, keeping everything cooler than ever.
Do you think it will be alright if I add the Cumana Reborn or would I have to change my actual PSU to a 9V one ?
I have a 7.5V PSU for my Oric and it works pretty well, keeping everything cooler than ever.
Do you think it will be alright if I add the Cumana Reborn or would I have to change my actual PSU to a 9V one ?
HigashiJun
Re: My new Cumana drive ;)
I think so. Depend of amper . My interface take approx 0,5 A when is powered by 9 volt , so if is powered from 7,5 take more...Oric take approx 1 amp so power supply must be 2,5 A or more with safety margin.
Re: My new Cumana drive ;)
Ok, 5 on the way, next 5 almost assembled so i relist next 10 units here. Have fun. https://www.sellmyretro.com/offer/details/40497
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
Re: My new Cumana drive ;)
Thanks for your reply. I have to check then, as my PSU is 7.5V 2A.
Might be too short...
HigashiJun
Re: My new Cumana drive ;)
The oric's original PSU is 9v/600mA, so 2 A may *just* do it.
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
Re: My new Cumana drive ;)
Thanks, I will definitely check it.
I have nothing else to connect to my Atmos, apart from the powered SCART lead.
Cheers.
HigashiJun
Re: My new Cumana drive ;)
In for one, donezaxon wrote: ↑Tue Jan 28, 2020 6:13 pm Ok, 5 on the way, next 5 almost assembled so i relist next 10 units here. Have fun. https://www.sellmyretro.com/offer/details/40497
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
Re: My new Cumana drive ;)
Hello zaxon,
I've just received my Cumana reborn.
It's a really nice piece of hardware you made. Everything looks so professional and well designed...
I'd like to thank you specially for the well packaged packet; everything arrived not damaged at all despite the distance.
Keep up your good work !
I've just received my Cumana reborn.
It's a really nice piece of hardware you made. Everything looks so professional and well designed...
I'd like to thank you specially for the well packaged packet; everything arrived not damaged at all despite the distance.
Keep up your good work !
HigashiJun
Re: My new Cumana drive ;)
As a side note, if someone could please check that Blake's7 works fine (loading and saving, remember to check the disk image is writable), I'd be enormously grateful.
- HigashiJun
- Flying Officer
- Posts: 205
- Joined: Tue Dec 10, 2019 9:29 am
- Location: Tokyo (Japan)
Re: My new Cumana drive ;)
Your game is one of my favorites and is waiting to be tested on the Cumana reborn, but my Atmos is under maintenance by now. If everything comes together (and if my work doesn't keep me busy...), I should be able to test it around mid-march.
I guess other forum members will test it before and let you know.
Cheers.
HigashiJun
Re: My new Cumana drive ;)
Next 6 ready to go tomorrow, sorry about delay but is really lot of work to assembly every one.
- Attachments
-
- 20200211_194434[1].jpg (2.62 MiB) Viewed 8305 times