I do not think I have a 3" floppy around in my house but I could check with a meter and the proper dimensions.
Modern Software Packaging
- NekoNoNiaow
- Flight Lieutenant
- Posts: 272
- Joined: Sun Jan 15, 2006 10:08 pm
- Location: Montreal, Canadia
Re: Modern Software Packaging
- 7.99 cm wide (really a tiny tiny bit less than 8cm)I do not think I have a 3" floppy around in my house but I could check with a meter and the proper dimensions.
- 9.95 cm tall (really almost perfectly 10cm)
- 5mm thick
That's an Amsoft, can probably expect other to be a fraction of mm different here and there
Re: Modern Software Packaging
After the packaging itself, I decided to do some test with the floppy labels, knowing that my main target is 3" floppies... but trying to see how it would look if you tried to put these labels on 3.5" ones.
Here is what that looks like (simulated) My first batch of labels is here: http://defence-force.org/download/oric/ ... Page_1.png
If you have a favorite game that exists on floppy (ie: the DSK is available), even if it's some compilation of game, please tell, I'll see if I can collect enough of these to justify making a second page of stickers.
Feedback is welcome
Here is what that looks like (simulated) My first batch of labels is here: http://defence-force.org/download/oric/ ... Page_1.png
If you have a favorite game that exists on floppy (ie: the DSK is available), even if it's some compilation of game, please tell, I'll see if I can collect enough of these to justify making a second page of stickers.
Feedback is welcome
- ibisum
- Wing Commander
- Posts: 1655
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: Modern Software Packaging
Its amazing how visceral my reaction is to seeing this kinds of things, in the 21st Century. I truly want to possess a mass library of Oric titles that look this good. However, Cumulus precludes me making the effort.
Re: Modern Software Packaging
Beautiful! I'm really obsessed with Oric's 'dotted' surface .
@ibisum: you can create SD-Card library with down-scaled labels too .
@ibisum: you can create SD-Card library with down-scaled labels too .
Re: Modern Software Packaging
You can also use it sideways
Re: Modern Software Packaging
They do look terrific!
Re: Modern Software Packaging
I'm satisfied by the current style for the games and stickers, so I'm considering going to the print show soon, here is what that looks like:
You may have noticed that I removed all the 16k/48k/atmos/tape/floppy/... mentions, the reason is that some people don't care, it's kind of messy/busy, and it makes it harder to reuse the same inly for both tape or floppy, so instead I came up with a solution that involves transparent stickers: (I've about 200 of the stickers sheets if you are interested)
The place where I'm going to do the printing is basically making me pay a initial high fee for the first sheet, and then a reduced fee for each additional sheet so it's all a question of balance for the final cost.
When I checked a few months ago, the prices for the full 45x32cm pages were of 157 kr for the initial page, then 18 kr for each additional sheet, or 54 kr for sticker sheets (Assume 10 kr = 1 euro, it was not 100% clear if the 157 kr one was a one time fee for the operation, or for each new design, so at best if would be 157+18+18+54+54=301 kr (30 euros) for one set of 8 inlays and 40 floppy stickers, obviously, the more I print the lower the additional cost, knowing that in the mean time the prices may have changed)
At the very least, I'm going to print one of each of these four sheets, for my own usage, and then, if some of you are interested, I can print additional ones, get them nicely cut, and sent to you at the actual cost as normal letter postage to limit additional costs
As you can see, there's one case with a big red "?", which I could either replace with a copy of one of the games (if there's a popular demand so we can double the numbers of inlays for the same cost), or use it for another game (suggestions welcome).
The bottom line is: This is going to be printed, but that's going to only happen once because of the startup-cost.
Feedback welcome
On the bottom right you can see some variants of Oric themed floppy stickers for single sided 3", double sided 3" and 3.5".You may have noticed that I removed all the 16k/48k/atmos/tape/floppy/... mentions, the reason is that some people don't care, it's kind of messy/busy, and it makes it harder to reuse the same inly for both tape or floppy, so instead I came up with a solution that involves transparent stickers: (I've about 200 of the stickers sheets if you are interested)
The place where I'm going to do the printing is basically making me pay a initial high fee for the first sheet, and then a reduced fee for each additional sheet so it's all a question of balance for the final cost.
When I checked a few months ago, the prices for the full 45x32cm pages were of 157 kr for the initial page, then 18 kr for each additional sheet, or 54 kr for sticker sheets (Assume 10 kr = 1 euro, it was not 100% clear if the 157 kr one was a one time fee for the operation, or for each new design, so at best if would be 157+18+18+54+54=301 kr (30 euros) for one set of 8 inlays and 40 floppy stickers, obviously, the more I print the lower the additional cost, knowing that in the mean time the prices may have changed)
At the very least, I'm going to print one of each of these four sheets, for my own usage, and then, if some of you are interested, I can print additional ones, get them nicely cut, and sent to you at the actual cost as normal letter postage to limit additional costs
As you can see, there's one case with a big red "?", which I could either replace with a copy of one of the games (if there's a popular demand so we can double the numbers of inlays for the same cost), or use it for another game (suggestions welcome).
The bottom line is: This is going to be printed, but that's going to only happen once because of the startup-cost.
Feedback welcome
- ibisum
- Wing Commander
- Posts: 1655
- Joined: Fri Apr 03, 2009 8:56 am
- Location: Vienna, Austria
- Contact:
Re: Modern Software Packaging
I definitely want a full set of everything! . Let me know where to send the moolah.
Re: Modern Software Packaging
Gettttttting there...
I did a new pass of cleaning, fixing, centering, etc... and I came up with the four pictures in this folder:
http://www.defence-force.org/download/oric/games/print/
could you guy go and do a quick check, and tell me if there's anything shockingly wrong, strange, etc... I've been looking at these things for so long that I'm almost blind by now
Thanks!
I did a new pass of cleaning, fixing, centering, etc... and I came up with the four pictures in this folder:
http://www.defence-force.org/download/oric/games/print/
could you guy go and do a quick check, and tell me if there's anything shockingly wrong, strange, etc... I've been looking at these things for so long that I'm almost blind by now
Thanks!
Re: Modern Software Packaging
Awesome job Dbug, the artwork & fonts are stunning!!
Just caught a small typo on "PrintSheet_1" for Kong: "barels" is misspelt, should be "barrels"
Just caught a small typo on "PrintSheet_1" for Kong: "barels" is misspelt, should be "barrels"
Re: Modern Software Packaging
Did not have time to have a look at the high resolution version yet, but I must say that, it being an impressive job, I miss the Defence-Force logo...
I had it on Skool Daze and Blake's7 at least, and it looked quite professional.
I had it on Skool Daze and Blake's7 at least, and it looked quite professional.
Re: Modern Software Packaging
Thanks, fixed
I had the original defence force logo on the first versions, I even had it on the printed out prototype, but what I was looking for was consistency across the entire set of games, and the bright blue and yellow was drawing the attention out of the main thing: The game itself.chema wrote: Did not have time to have a look at the high resolution version yet, but I must say that, it being an impressive job, I miss the Defence-Force logo...
I had it on Skool Daze and Blake's7 at least, and it looked quite professional.
Also, when you have your collection of games around, it's kind of confusing to have the actual Defence Force game sitting next to another game with the same logo despite not being related at all
I came up with the semi transparent "cut out" defence force logo on the back as an alternative: If you look at it, you will see that this is actually the same font, but instead of the 3D embossed golden it's just using the base colors of the actual game package.
But yeah, was not a simple decision.
In any case, the pictures are available, so if you want, you can still print your own versions with the logo back on them
Re: Modern Software Packaging
You've got a point there indeed. I understand
I liked your designs very much. I did not find anything strange (I am not the best to look for typos or small mistakes, anyway). I might say I miss the "The adventure game" lettering under the logo on Blake's 7 and also think the DEFENCE FORCE label is not as clearly visible as in the rest, but nothing really important.
Excellent work!
- NekoNoNiaow
- Flight Lieutenant
- Posts: 272
- Joined: Sun Jan 15, 2006 10:08 pm
- Location: Montreal, Canadia
Re: Modern Software Packaging
These look nice!Dbug wrote: ↑Sat Jun 15, 2019 2:29 pm I did a new pass of cleaning, fixing, centering, etc... and I came up with the four pictures in this folder:
http://www.defence-force.org/download/oric/games/print/
could you guy go and do a quick check, and tell me if there's anything shockingly wrong, strange, etc... I've been looking at these things for so long that I'm almost blind by now
In passing, I noticed that one of the printouts shows screenshots of your "road" demo, are you planning to make a full driving game out of it?
I tried my best to read the title of the corresponding printout but that font was really hard to read.. "TURBO ... something?".