The error appears to be the image: there's sufficiently many out there with incorrect CRCs that I think Oricutron declines to check them (?). A quick run through my DSK CRC fixer reports 2720 CRCs checked, 952 fixed. A correct DSK image is attached.iss wrote: ↑Thu Nov 23, 2017 11:59 pmCool! ... and it works!
Nice RGB and composite emulation.
All my DSK images are running fine, but I found that original Blake's 7 (v1.1 - English) fails to boot, there is error after each sector was read: CRC error; terminating Maybe the problem is in the image (Chema?).
Oh, sure. I didn't realise it was applicable. I'll see what my options are. I like to add things only so as not to increase complexity, so I will need to add some logic to distinguish an Oric image from other kinds of image. I admit that with the Oric DSK being platform specific I've not had to look at that at all really.
The situation is quite different for tapes: the emulator allows CSWs to be mapped to any supported platform by content inspection, and if it's launching an Oric then it decides between BASIC 1.0 and 1.1 through disassembly.
Yes, true. Apologies for failure to mention that.