
And now, box for the controller.
- Silicebit.
- Flying Officer
- Posts: 243
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
And now, box for the controller.
The same guy who designed the box for the AmpliBus, has designed a box for the controller and one disk drive. You can see the good work at: http://retrowiki.es/viewtopic.php?f=40& ... p200086115 

Oric user since 1984. YouTube
Re: And now, box for the controller.
Very nice job 
Now imagine if he had a more accurate printer

Now imagine if he had a more accurate printer

Re: And now, box for the controller.
Nice !
Maybe that could be done for the Oric computer and the Atmostrat project.
Maybe that could be done for the Oric computer and the Atmostrat project.
- Silicebit.
- Flying Officer
- Posts: 243
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Now you can download the STL files available in first post of thread. Enjoy 

Oric user since 1984. YouTube
- Silicebit.
- Flying Officer
- Posts: 243
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Perhaps you need a big 3D printer for print a case for Oric.
Oric user since 1984. YouTube
- coco.oric
- Flight Lieutenant
- Posts: 438
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: And now, box for the controller.
Whatever we need a big printer (i didn't have one yet), it's a very good idea to share it.
Thanks a lot
Thanks a lot
Re: And now, box for the controller.
The Good, the Bad and the Ugly
I started with the right one using ABS material, but the result was extremely fragile -
the supports broke before printing was finished. The left and the middle boxes are
from PLA material and they are really shiny and beautiful !
Except the material, it's important to have enough patience - in my case ~20 hours per each single part!
The color theme is 'Oric-1' related, if one day I have good red/black material I'll reprint in Oric Atmos style
.

the supports broke before printing was finished. The left and the middle boxes are
from PLA material and they are really shiny and beautiful !
Except the material, it's important to have enough patience - in my case ~20 hours per each single part!

The color theme is 'Oric-1' related, if one day I have good red/black material I'll reprint in Oric Atmos style

- Silicebit.
- Flying Officer
- Posts: 243
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Hey iss, that's an awesome print!
A pity of lost ABS! 


Oric user since 1984. YouTube
Who is online
Users browsing this forum: No registered users and 0 guests