Page 1 of 1

And now, box for the controller.

Posted: Sat Sep 09, 2017 5:54 pm
by Silicebit.
The same guy who designed the box for the AmpliBus, has designed a box for the controller and one disk drive. You can see the good work at: http://retrowiki.es/viewtopic.php?f=40& ... p200086115 :shock:

Re: And now, box for the controller.

Posted: Sun Sep 10, 2017 2:44 pm
by Dbug
Very nice job :)
Now imagine if he had a more accurate printer :D

Re: And now, box for the controller.

Posted: Sat Sep 16, 2017 5:43 pm
by kenneth
Nice !
Maybe that could be done for the Oric computer and the Atmostrat project.

Re: And now, box for the controller.

Posted: Tue Sep 19, 2017 5:29 pm
by Silicebit.
Now you can download the STL files available in first post of thread. Enjoy :-)

Re: And now, box for the controller.

Posted: Tue Sep 19, 2017 5:33 pm
by Silicebit.
kenneth wrote: Sat Sep 16, 2017 5:43 pm Nice !
Maybe that could be done for the Oric computer and the Atmostrat project.
Perhaps you need a big 3D printer for print a case for Oric.

Re: And now, box for the controller.

Posted: Tue Sep 19, 2017 7:00 pm
by coco.oric
Whatever we need a big printer (i didn't have one yet), it's a very good idea to share it.
Thanks a lot

Re: And now, box for the controller.

Posted: Thu Nov 30, 2017 9:09 pm
by iss
The Good, the Bad and the Ugly :)
20171130_213534.jpg
20171130_213704.jpg
20171130_213745.jpg
I started with the right one using ABS material, but the result was extremely fragile -
the supports broke before printing was finished. The left and the middle boxes are
from PLA material and they are really shiny and beautiful !
Except the material, it's important to have enough patience - in my case ~20 hours per each single part! :shock:
The color theme is 'Oric-1' related, if one day I have good red/black material I'll reprint in Oric Atmos style :).

Re: And now, box for the controller.

Posted: Thu Dec 07, 2017 8:58 pm
by Silicebit.
Hey iss, that's an awesome print! :shock: A pity of lost ABS! :(