DRAMARDUINO - Dram tester with Arduino

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
Post Reply
User avatar
iss
Squad Leader
Posts: 756
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

DRAMARDUINO - Dram tester with Arduino

Post by iss » Sat Oct 15, 2016 2:30 pm

Hi all!

Below you can see all details of my 2-hours 2-dollar project 'DramArduino'.
It's simple and very handy DRAM chip tester. It works with 4164 and 41256 IC's.
Testing is not too fast but acceptable - 4 different passes are performed in about 80 seconds total.
Results are 100% reliable only if the test FAILS - you can throw away the chip without fear.
If the test passes, this doesn't certainly mean that it will work in Oric, because as you know Oric's are very 'sensitive' to DRAM.
Actually this was my goal exactly - to sort out the working chips from about 200 before I'm get bored :).

Working with the tool is easy: place the chip in the ZIF socket, press small reset button, wait until GREEN LED blinks,
if it remains permanently on - chip is OK, if the chip is bad - RED LED lights.
If USB is connected, status is reported in your serial console. This helped me to detect some 'lazy' chips - they failed in
different, on every next test, growing addresses but when they become 'hot' test passes always.
IIRC such fail to boot Oric was reported somewhere in this forum...

Attached are 'schematic', source code and pictures - do with them what you want :).
dramarduino.png
dramarduino.ino.zip
(1.24 KiB) Downloaded 657 times
da.jpg

User avatar
Voyageur
1st Star Corporal
Posts: 11
Joined: Thu Oct 18, 2018 8:25 am
Location: Sydney

Re: DRAMARDUINO - Dram tester with Arduino

Post by Voyageur » Wed Jan 16, 2019 1:36 am

Hi Iss,
Thank you for sharing the DramTester.
I've made one and it works !
I just controlled some 4164 and it is a good and not so long test :)
If you agree, I will show this Arduino shield on flag_fr CEO forum.
Have a good day !
Oric Atmos : a new life !

User avatar
iss
Squad Leader
Posts: 756
Joined: Sat Apr 03, 2010 5:43 pm
Location: Bulgaria
Contact:

Re: DRAMARDUINO - Dram tester with Arduino

Post by iss » Wed Jan 16, 2019 8:35 am

Hello, Voyageur!
I'm very glad that you liked this little tool and I'll be really happy if you share it on CEO forum.

Post Reply