Does anyone have a V1.1 or V1.0 ROM they will part with?
I currently have an EPROM and won’t be able to use my Cumana interface with it due to the ROMDIS signal.
Oric ROM wanted
Oric ROM wanted
Oric Extended Basic V1.1
(C) 1983 Tangerine
37631 Bytes Free
(C) 1983 Tangerine
37631 Bytes Free
Re: Oric ROM wanted
You'd probably hang me, but I kept my original Oric-1 ROM in a drawer for years, and only recently lost it. No idea where on Earth it is..
This being said, there is a trick to be able to use an EPROM with a disk unit. It required some hardware doing, but nothing too difficult IIRC. Search a bit around the forum and you'll surely find it.
This being said, there is a trick to be able to use an EPROM with a disk unit. It required some hardware doing, but nothing too difficult IIRC. Search a bit around the forum and you'll surely find it.
Re: Oric ROM wanted
I have read some details on fitting a LS00 to IC11 and cutting a track, Ideally I would rather have a real V1.1 or a V1.0 as I had fitted the Mod to stop the AY getting damaged prior to fixing the Oric.
I will keep looking and asking as I will always be useful to have one....
Does the Pravetz ROM work in Oric-1's and can it use a Microdisc or Cumana Disk Interface???
I will keep looking and asking as I will always be useful to have one....
Does the Pravetz ROM work in Oric-1's and can it use a Microdisc or Cumana Disk Interface???
Oric Extended Basic V1.1
(C) 1983 Tangerine
37631 Bytes Free
(C) 1983 Tangerine
37631 Bytes Free
Re: Oric ROM wanted
Yes, Pravetz ROM works with any controller. But it's actually exact copy of early Atmos ROM (1.1). Differences are only:
- not fixed CLOAD/CSAVE routines
- Cyrillic chars in place of small Latin letters
- keyboard translation table.
Better use the real Atmos ROM (1.1b). If you need really Cyrillic chars you can always load them 'dynamically' from TAP or from disk file.