Looky what arrived.... my Erebus.
So cool!
TJ
btw, I added link at the end of the video to this website! Hope it brings some new traffic here too.
https://youtu.be/YoZ_qmVp5D8
My Erebus arrived. Unbox & Test Video
- OricSociety
- 2nd Star Corporal
- Posts: 23
- Joined: Tue Jan 21, 2020 7:57 am
Re: My Erebus arrived. Unbox & Test Video
Nice video, thanks for the links.
Re: My Erebus arrived. Unbox & Test Video
Regarding the booting problem, are you doing on/off on the mains, or is it an on/off switch on the actual 9v input?
I've never had an Oric that would start if the 9v was already connected and the you would plug the power brick, that's why I've installed a switch on the cable that connects to the Oric itself.
You can see the switch I'm using in this video:
I've never had an Oric that would start if the 9v was already connected and the you would plug the power brick, that's why I've installed a switch on the cable that connects to the Oric itself.
You can see the switch I'm using in this video:
- OricSociety
- 2nd Star Corporal
- Posts: 23
- Joined: Tue Jan 21, 2020 7:57 am
Re: My Erebus arrived. Unbox & Test Video
As I am using an Up Transformer here in USA, I already have all the power cords connected and brick plugged in and the Up Transformer has an on/off switch.
I will try leaving the power cord unplugged from the Atmos this next time and have all powered up before I plug the cord back into the rear of the Atmos and see what happens.
Thanks
TJ
I will try leaving the power cord unplugged from the Atmos this next time and have all powered up before I plug the cord back into the rear of the Atmos and see what happens.
Thanks
TJ
Dbug wrote: ↑Wed Mar 18, 2020 10:19 am Regarding the booting problem, are you doing on/off on the mains, or is it an on/off switch on the actual 9v input?
I've never had an Oric that would start if the 9v was already connected and the you would plug the power brick, that's why I've installed a switch on the cable that connects to the Oric itself.
You can see the switch I'm using in this video: <edited out>
- OricSociety
- 2nd Star Corporal
- Posts: 23
- Joined: Tue Jan 21, 2020 7:57 am
Re: My Erebus arrived. Unbox & Test Video
Seems you are onto something here. Have one booted twice but... this time I turned on Up Transformer 1st and then once done, plugged in power lead into the Atmos, and both times she booted right away! Good news so far.
Maybe an In-Line on/off switch could help me here.
TJ
Maybe an In-Line on/off switch could help me here.
TJ
Dbug wrote: ↑Wed Mar 18, 2020 10:19 am Regarding the booting problem, are you doing on/off on the mains, or is it an on/off switch on the actual 9v input?
I've never had an Oric that would start if the 9v was already connected and the you would plug the power brick, that's why I've installed a switch on the cable that connects to the Oric itself.