Next Cumulus batch

In this forum you can write about anything that does not fit in other forums.
This includes generic Oric talkings and things that are totaly unrelated but want to share with people here :)

What type of box do you prefer?

A 3D printed like Metadata cases
23
70%
A Layered one like the PiBows
9
27%
Something else? (please explain on the topic)
1
3%
 
Total votes: 33

User avatar
carlsson
Pilot Officer
Posts: 127
Joined: Thu Jan 12, 2006 11:26 pm
Location: Västerås, Sweden

Re: Next Cumulus batch

Post by carlsson » Wed Feb 08, 2017 1:47 pm

Me too, checking back here every now and then. Hopefully I can get my Oric-1 fixed before there is a Cumulus ready to buy.
Anders Carlsson

User avatar
8bit-Dude
Private
Posts: 1
Joined: Tue Mar 14, 2017 1:33 pm

Re: Next Cumulus batch

Post by 8bit-Dude » Thu Mar 16, 2017 7:29 am

I'm in too, completed the survey! :P

P.S: I am working on a cross platform game for all 6502 based 8 bit computers, including the Atmos.
You can read more here: 8bit-slicks.com

User avatar
fandenivoldsk
1st Star Corporal
Posts: 14
Joined: Fri Nov 08, 2013 10:13 am

Re: Next Cumulus batch

Post by fandenivoldsk » Tue May 09, 2017 12:17 pm

I am ready. Survey done.

Godzil
Squad Leader
Posts: 757
Joined: Sat May 21, 2011 7:21 pm
Location: Between UK and France
Contact:

Re: Next Cumulus batch

Post by Godzil » Tue Jun 13, 2017 10:43 pm

Hello everyone,

Just a quick recap on the Cumulus Rev2 project. It is not dead, at all!
I've just been unable to work on it for personal problems. (a bit to private to discuss about that here, but don't worry I'm fine)

The hardware is defined for the first set of prototype, the one that will allow me to make sure the hardware is feasible and build the software for the production version.

The next step on the project is to build that prototype, and start to make the software that will run on it (I've already started part of it, as much as I can do without having the hardware and as much as I was able to work on that project during that time)

I will keep people informed as soon as there are new thing about the project, but plus be assured that this project is not dead and is not going to be dead soon. You will get your Cumulus Rev 2 sooner than later :)

I'm really sorry to make every one to wait for it, that project is not a simple project that can be finished in a couple of day, it will probably take some weeks if not month with a reasonable amount of time to work on it.
The good thing is that I've started to look again on the hardware to check that I really can make a production of prototype, I will do a small modification to prevent expensive modification in case something does not work as expected.

Unrelated but I've also had a look at Oric Mouse, and found a potential solution for it that will not make it as a full DIY kit but close to. I will also resume working on the "new" oric project, well I do have a project that is close to not sure really if I can integrate the new oric to it we will see, but that not something urgent anyway.

So the cumulus Rev2 is there, not forgotten, not dead, just running slower than a snail, but will get more strength soon :)

User avatar
Chema
Game master
Posts: 2194
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: Next Cumulus batch

Post by Chema » Wed Jun 14, 2017 10:31 pm

Great news. Good luck!

RichKK
Private
Posts: 2
Joined: Fri Apr 01, 2016 8:24 pm

Re: Next Cumulus batch

Post by RichKK » Sun Jul 09, 2017 11:34 am

There are a very limited amount of Cumulus' available here.
The listing went live yesterday evening. These are made by Piotr Bugaj and were announced on the Facebook group Oric 1 & Atmos Owners/Users yesterday.

:D

User avatar
Hialmar
Flight Lieutenant
Posts: 320
Joined: Tue Mar 04, 2014 11:25 am
Location: Toulouse, France
Contact:

Re: Next Cumulus batch

Post by Hialmar » Fri Apr 13, 2018 5:24 am

Just bought one.
I’ll tell you if it works well.
Thanks for this message that I completely overlooked.
Hialmar
CEO and Silicium member.

User avatar
dreamseal
Officer Cadet
Posts: 43
Joined: Sat Mar 17, 2018 6:14 pm

Re: Next Cumulus batch

Post by dreamseal » Thu Apr 19, 2018 10:15 pm

I purchased one of these as well. I'll also give an update, hopefully this weekend, on how it performs. It appears that quantities of these are being released all the time. When they run out, a week or so later there's more available.

I did wonder why the device has to be so big though. I know that its a lot smaller than the original Microdisc, but when you compare it with a Commodore SD2IEC, it is quite chunky.

Do you think we'll some day see an Oric SD disk device about the size of a Commodore SD2IEC?

User avatar
Hialmar
Flight Lieutenant
Posts: 320
Joined: Tue Mar 04, 2014 11:25 am
Location: Toulouse, France
Contact:

Re: Next Cumulus batch

Post by Hialmar » Sun May 20, 2018 7:13 am

My cumulus works well on my English Atmos (complete one with RF module) but not on my French Atmos (the one I bought in 85 or 86 which hasn’t the RF modulator and outputs 5V on the SCART socket).
Not sure what is the problem with the French Atmos but I’m happy to have a cumulus setting that works well.
The French Atmos also has problems with a Cumana board from CEO, Silicebit’s microdisc controller clone and Jorodr’s SD drive. So it’s definitely a problem with my Atmos and not one of either of these solutions.
Hialmar
CEO and Silicium member.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests