Will it work with Pravetz-8D?
After long postponing I tried Cumulus with Pravetz-8D here is the result:
- connected properly and 3 times checked
- power on Pravetz - freezed on memory pattern (i.e. black/white vertical stripes on screen)
- Cumulus works allowing to select image from SDCard
- 'reset' from Cumulus menu does nothing
- power-off and power-on again - on screen the same result - Cumulus is DEAD!
There is back light on Cumulus LCD but no menu...
So, probably I'm unlucky but be careful with Pravetz-8D.
Now I need some help to try to fix my Cumulus - what is the purpose of the two connectors inside Cumulus box?
If there is UART or RS232 (or JTAG) I need pin description - just to see if there's some response...