about ijk joystick - your code works in Oricutron , but some details need to be considered...
EDIT:
1. Make sure that joystick is properly configured in 'oricutron.cfg' - use unquoted strings:
right: joyinterface = ijk / wrong: joyinterface = 'ijk'
2. According to the same page in DF-Wiki, when reading Port A to detect joystick Bit 5 means:
Code: Select all
B5 Low whenever IJK joystick attached so could detect IJK Interface
3. The code will work but PortA and PortB should be first properly initialized and than restored .
As result see the attached zip file with source and demo. Tested in Oricutron.
If I found my joystick I'll test the code with real Oric, but I'm not sure if it was IJK or something else...